Alanqa Solutions offers a wide range of Aeroshell products, including Aeroshell grease, Aeroshell fluid, and Aeroshell turbine oil, in Maharashtra. Trusted supplier for premium aviation lubricants and fluids.
Aeroshell Grease 14
Aeroshell grease 14 is the leading multipurpose grease for helicopter and it is approved by all the manufacturers. Aeroshell Grease 14 is particularly suitable for the lubrication of helicopter main and tailor rotor bearings, spines, etc. due to its anti-fret properties,
Aeroshell Grease 22
Aeroshell Grease 22 is mostly recommended wherever severe operating conditions are encountered as is high bearing loads, high speeds, wide operating temperature range, and particularly where long grease retention and high resistance water washout are required.
Aeroshell Grease 33
Aeroshell Grease is BMS 3-33C approved and offers the improved performance properties required by this specification. It is composed of a lithium complex synthetic based oil.
Aeroshell Grease 5
Aeroshell grease 5 is particularly effective use as a wheel bearing grease, Where landing speeds are high and is suitable for the lubrication of aircraft and engine accessories operating at high speed and high temperatures, like. magnetos generators and starters.
Aeroshell Grease 58
Aeroshell grease 58 meets the requirements of the SAE AMS 3058. Wide temperature range lithium complex aircraft while bearing grease specification.
Aeroshell Grease 6
Aeroshell grease 6 is general-purpose airframe grease for use in antifriction bearings, gearboxes and plain bearings within the temperature range from 40C to 121C.
Aeroshell Grease 64
Aeroshell grease 64 (previously known as AeroShell 33MS) is most aiframer’s general purpose airframe greasing requirements, being approved for use in airbus, Boeing and many other aircraft types.
Aeroshell Grease 7
Aeroshell Grease 7 satisfy mostly all the airframe grease requirements of turbine engine aircraft and those of piston engine aircraft provided that seal incompitability does not occur.
Aeroshell Fluid 12
Aeroshell fluid 12 is mostly used for general aircraft lubrication and for aircraft gyro instrument gimbal bearings, separately lubricated high-speed turbines and compressors, aircraft air cycle equipment and electronic equipment as well. Aeroshell Fluid 12 is preferabaly suitable for use when an oil with a low evaporation rate is required at high and low temperatures.
Aeroshell Fluid 3
Aeroshell Fluid is used in general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaff joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments.
Aeroshell Fluid 31
Aeroshell Fluid 31 is recommended for use in aircraft, ordnance and missiles systems operating from -40C to 205C. This Fluid mostly use in auto pilots, shock absorbers, breaks, flight control systems, hydraulic servo-controlled systems and other systems using synthetic elastomer seals.
Aeroshell Fluid 41
Aeroshell Fluid 41 is used as hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid-commonly in landing gear hydraulic systems.
Aeroshell Fluid 61
Aeroshell fluid 61 is designed for use where a fire-resistant preservative grade hydraulic fluid is required and is suitable for operational use from -40°C to +204°C (-40°F to +399°F) as well as preservations of components during storage and shipment.
Aeroshell LGF
The Superb low temperature properties of aeroshell LGF make it specially suitable in areas of low temperature operations. Colour of Aeroshell LGF is straw yellow. Also compatible with aeroshell fluid 41.
Aeroshell Ascender
Aeroshell ascender was developed for the new generation of gas turbine engines as law coking, high compatibility product. Its improved thermal and oxidative stability will make sure negligible coke formation in engines.
Aeroshell Turbine Oil 308
AEROSHELL TURBINE OIL 308 was developed specifically for use in particular models of aircraft prop and turbojet engines. Its comply with MIL-PRF-7808(formerly MIL-L-7808). Aeroshell turbine oil 308 contains a synthetic ester oil and should not be used in contact with incompitabile seal, and it also affects some plants and plastics.
Aeroshell Turbine Oil 390
AeroShell Turbine Oil 390 was developed essentially as an improved 3 mm2/s oil for British turbojet engines. it is fully approved for a wide range of turbine engines.
Aeroshell Turbine Oil 500
AeroShell Turbine Oil 500 was developed primarily to meet the requirements of Pratt & Whitney 521 Type II and MIL-L-23699 specifications and is vastly suitable for most civil and military engines requiring this class of lubricant.
Aeroshell Turbine Oil 555
AeroShell Turbine Oil 555 was specifically developed to meet the high temperatures and load carrying requirements of supersonic transport (SST) engines and it meets DEF STAN 91-100 (formerly DERD 2497) and XAS-2354 specifications. AeroShell Turbine Oil 555 was also enhanced performance in current engines.
Aeroshell Turbine Oil 560
AeroShell Turbine Oil 560 is a 3rd generation, high performance, low coking 5 mm2/s synthetic hindered ester oil incorporating a carefully selected and finely balanced combination of additives to improve thermal and oxidation stability.
Aeroshell Turbine Oil 750
Aeroshell Turbine Oil 750 was primarily developed to meet the requirements of DERD 2487 (now DEF STAN 91-98) and to furnish a high standard of lubrication in British civil gas turbines, specifically turboprop engines where a good load carrying oil was required for the propeller reduction gearbox.
Aeroshell Turbine Oil 2
Aeroshell Turbine Oil 2 is mostly used for inhibiting fuel systems and fuel system components during preservation. Aeroshell Turbine Oil 2 is an analogue to the Russian Grade MK-8 and can therefore be used in engines which require the use of Russian grade oil.
Aeroshell Turbine Oil 3
Aeroshell Turbine Oil 3 was specifically developed for early pure jet engines and is still approved for some versions of these engines and the Turbomeca Astazou, Artouste, Turmo, Bastan and Marbore engines.
Aeroshell W100
Aeroshell W Oils comes in three different viscosity grades: Aeroshell Oil W80 - AeroShell Oil W100 - Aeroshell Oil W120.The suffix for each grade specify the viscosity of the oil at 210°F in saybolt Universal Seconds.
Aeroshell W80
AeroShell Oil W80 is an ashless dispersant piston engine oil that minimises wear during cold starts, ensuring reliable lubrication and performance in lower-temperature operations.
Aeroshell Sport Plus 4
Aeroshell Oil Sport Plus 4 is intended for use in four-stroke (four-cycle) aircraft piston engines that are of an real automotive design. These engines include carburetted, fuel-injected and turbocharged types like the ROTAX® 912,914, 915 series.
Aeroshell Gadus S2 V220 2
Shell Gadus S2 V220 greases are high quality multipurpose, extreme-pressure greases based on a blend of high viscosity index mineral oils and a lithium hydroxystreate soap thickener and contain extreme-pressure and other proven additives.